Test the suspension before the car turns a wheel

Generated from content/lms/suspension-and-chassis-design/03-compliance-and-kinematic-validation/module.md; edit the source file, not this page.

Source path: content/lms/suspension-and-chassis-design/03-compliance-and-kinematic-validation/module.md

Course: Design suspension geometry that actually wins races

Estimated duration: 70 minutes

Module Overview

Use kinematics rigs, compliance rigs, and finite-element models to validate that the built suspension matches the design intent.

Lessons

• Validate the wheel path before the car moves - 60 minutes
• Measure the alignment your bushings create - 45 minutes
• Predict torsional stiffness before cutting tube - 60 minutes